Skip to content
Talent Reel
Menu

How to Photograph the Northern Lights: Settings and Steps

Practical guide to shooting the aurora: settings that work, focusing in the dark, planning a clear night, and fixing blurry or noisy results.

Milky Way starfield above a dark mountain ridge
In this article

The short answer

You can photograph the northern lights with any camera that lets you set the aperture, shutter speed and ISO by hand. The essentials are a wide, fast lens, a tripod that will not move, and a genuinely dark sky. Put the camera in manual mode, open the aperture as wide as it will go, start at ISO 1600, focus manually on a bright star, then take test frames of five to ten seconds and adjust from what you see.

The aurora is a moving, low-light subject, so the whole technique is a balancing act between gathering enough light and keeping the stars and the aurora's rays sharp. Long exposures collect light but smear the structure and turn stars into trails. High ISO freezes the movement but adds noise. Most usable frames sit somewhere between the two, and the right balance shifts as the display changes through the night.

What to pack for a night out

  • A sturdy tripod. Wind is the enemy. Keep the centre column down and hang a bag from the hook to add weight.
  • A fast wide lens. Something around 14–24 mm on full frame, or 10–18 mm on a crop sensor, with an aperture of f/2.8 or wider.
  • Spare batteries, carried inside a jacket so they stay warm.
  • A headtorch with a red mode, plus a small white torch for setting up in the light.
  • A microfibre cloth and a lens hood for frost, condensation and stray light.
  • A remote release, or just the camera's two-second timer.
  • Warm layers, gloves you can work a camera in, and a flask. You will be standing still for hours.

Plan for three things at once: dark, clear and active

Aurora shoots fail through planning far more often than through settings. You need all three of these in the same place at the same time: geomagnetic activity, a clear sky and real darkness.

  • Activity. Check an aurora forecast on the afternoon of the shoot. The Kp index is a global measure; the aurora oval forecast tells you where the display is likely to sit, which is far more useful locally.
  • Cloud. Use a cloud forecast for your exact spot rather than a regional one. Coastlines, valleys and mountain passes each have their own weather.
  • Darkness. Get away from streetlights and check a light-pollution map before you commit to a location. Twilight has to be finished, which rules out midsummer in the far north entirely.
  • Moon phase. A new moon gives the darkest sky and the strongest aurora colour. A thin crescent gives you a faintly lit foreground to work with, which is a reasonable trade when the landscape is part of the picture.

Camera settings for the aurora

There is no single correct exposure, because the brightness of the display changes minute by minute. Treat the numbers below as a starting point and adjust from what you see on the back of the camera.

Aperture
Wide open — f/2.8 or faster if your lens allows
ISO
1600 to start; 3200 when the aurora is moving fast
Shutter
5–10 seconds; 2–4 seconds for bright substorms
Focus
Manual, set on a bright star at 10× magnification
White balance
Around 3800 K, or Daylight and corrected later
File format
RAW, so you can fix colour and lift shadows
Stabilisation
Off — it fights the tripod and softens frames
Release
Two-second timer or a remote release

Aperture. Open the lens fully. A lens that is a little soft wide open still beats one stopped down to f/4, which quadruples your exposure time and lets the aurora move.

ISO. Start at 1600. If the frame is too dark and the aurora is moving, push to 3200 rather than lengthening the shutter. If you have light to spare, drop to 800 for a cleaner file.

Shutter. Five to ten seconds is a sensible first attempt. Fast, bright substorms need two to four seconds to keep the rays crisp; a quiet, faint arc can take fifteen or twenty seconds if the stars stay round.

White balance. Set it by hand or leave it on daylight and correct in the raw file. Auto white balance drifts from frame to frame at night.

Focus in the dark, step by step

  1. Switch the lens to manual focus

    Autofocus will hunt and give up on dim stars. Set the switch on the lens barrel to MF.

  2. Aim at a bright star near the middle of the frame

    Enter live view and magnify the view to its highest setting, usually 5× or 10×. Use the brightest star or planet you can find.

  3. Turn the focus ring until the star is the smallest point

    It should shrink to a pinprick, not a soft blob. Rock the ring either side of the sharpest point so you know you have found the true peak.

  4. Lock it and test

    Tape the focus ring if it creeps, take a test frame, and zoom in to 100% on the camera screen. Refocus if the temperature drops sharply during the night, as many lenses shift as they cool.

The shooting sequence on location

  1. Arrive before dark and set up

    Build the tripod, fit the lens hood, and get your layers on while you can still see. Setting up by headtorch in a wind is where most mistakes happen.

  2. Level the tripod and compose

    Put a foreground in the frame — a ridge, a cabin, a tree line, still water — and leave the horizon straight. Tighten every leg lock.

  3. Set the camera once

    Manual mode, RAW, widest aperture, ISO 1600, manual white balance, stabilisation off, two-second timer. Then leave those settings alone apart from ISO and shutter.

  4. Focus and lock off

    Focus on a star as described above, then check the ball head is fully tightened and the centre column has not been raised.

  5. Take a test frame

    Five seconds at ISO 3200 will be too bright for a strong display but is quick and tells you whether the composition and focus are right.

  6. Read the histogram and adjust

    Too dark and the aurora motionless: lengthen the shutter. Too bright, or the rays are blurring: shorten the shutter and then raise ISO if needed.

  7. Match the exposure to the display

    A faint arc can take ten to twenty seconds. A fast overhead corona needs two to four seconds to keep the rays distinct. Reassess every few minutes.

  8. Shoot continuously and review

    Fire a series rather than single frames, then check one at 100% zoom for focus and star shape before carrying on.

Compose a picture, not just a sky

  • Anchor the frame with something on the ground. A silhouetted ridge or a snow-covered cabin gives the aurora scale, and scale is what makes the shot feel like a place rather than a texture.
  • Keep the horizon level. It is the first thing viewers notice and the easiest thing to fix on the tripod.
  • Leave room in the direction the aurora is drifting so the arc does not run out of frame.
  • Try portrait orientation for tall arcs and overhead coronas; wide landscape suits a low band along the horizon.
  • Light a foreground carefully if you want detail. One brief sweep of a torch while the shutter is open is enough; keep moving so you do not burn a bright patch into the frame.
  • Use still water for reflections when you can find it. Even a partial reflection doubles the light in the frame.

What usually goes wrong, and the fix

  • Stars are streaky. The shutter is too long for the lens, or the tripod moved. Shorten the exposure, use the timer, and check that the centre column is down and the head is tight.
  • Everything is slightly soft. Focus has slipped or the lens got knocked. Re-check at 10× magnification on a star.
  • The aurora is a white blob with no detail. It is overexposed. Cut the shutter first, then the ISO, and watch the histogram.
  • The image is very grainy. Either the ISO is too high for the sensor or the frame was underexposed and brightened later. Expose properly at the taking stage; some noise in a night frame is normal.
  • The sky glows orange along the bottom. That is light pollution. Point away from towns, or raise the camera angle to keep the worst of it out of frame.
  • The lens keeps fogging or frosting. Warm air from your body and breath is condensing on cold glass. Use the hood, wipe sparingly with a microfibre cloth, and let the gear acclimatise before you start.

Cold, condensation and staying safe

Batteries lose capacity quickly in freezing conditions, so carry spares inside a jacket and swap them before they die rather than after. When you go back inside, seal the camera in a bag and let it reach room temperature slowly, otherwise condensation will form inside the lens and body.

Aurora locations are usually cold, dark and often icy. Tell someone where you are going and when you expect to be back, stay on marked ground, and keep well clear of roads when you stop the car. Never walk onto a frozen lake or river without local advice.

Can you do it on a phone?

Yes, within limits. Many recent phones have a night mode that stacks several short exposures, and on a tripod or a solid resting place they can record a bright aurora as a small but recognisable image.

If your phone has a pro or manual mode, use it: set the ISO high, the shutter to five or ten seconds if the phone allows it, focus manually at infinity, turn the flash off, and use the timer so the phone is not moving when the shutter opens. Expect noise and a soft result when viewed at full size, and treat the phone as a record of the night rather than the main camera.

Editing: keep it believable

Aurora files are dark, so most of the work happens in a raw converter. Lift the shadows, pull the white balance towards neutral so snow and stars look white rather than yellow, add a little contrast, and apply modest noise reduction. Resist pushing saturation until the greens glow unnaturally — a display that looked astonishing in the sky will still look astonishing with restrained editing.

Edit in a dim room on a calibrated screen if you have one, keep the horizon level, and compare your result with the frames either side of it. If the colour changes dramatically from one frame to the next, you have over-edited.

Frequently asked questions

Do aurora photos really look like that in real life?

Often not. A camera collects light for several seconds and records colour the eye cannot resolve in dim conditions, so a display that appears as a faint grey band can photograph as vivid green. The structure is real; the intensity is the camera's doing.

What lens works best for the northern lights?

A wide, fast lens — roughly 14–24 mm on full frame — with an aperture of f/2.8 or wider. The wider aperture lets you use a shorter shutter and a lower ISO, which keeps both the stars and the aurora's rays crisp.

Will a full-frame camera make a big difference?

It helps, mainly through cleaner files at high ISO and more room to lift shadows. A crop-sensor camera with a fast wide lens and careful focusing will still produce strong aurora images.

How do I stop the stars turning into trails?

Keep the shutter short for your focal length — the longer the lens, the sooner trailing appears. In practice the aurora's own movement usually forces a shorter exposure than star trailing would.

Can I shoot the aurora in summer?

Only where the sky still gets properly dark. Inside the Arctic Circle the summer sky never darkens enough, so the practical season runs from autumn into early spring, depending on how far north you are.